Edirol UA-25 USB Audio interface - Computer Hardware
The UA-25 is a powerful USB Audio/MIDI interface designed to offer premium sound quality, rugged durability, and complete portability to the computer-based audio engineer. The UA-25 is compact enough to travel anywhere you can take your computer. It is designed using high-grade aluminium for the chassis, which offers two benefits: 1) The UA-25 can withstand hard impacts that are normally associated with travelling or working in the field, and 2) The aluminium is an excellent shield against high-frequency interference from other electrical components. The UA-25 is USB powered, so you never have to plug it into a wall socket, but you can still power condenser microphones with 48V phantom power. The seasoned audio professional will love the UA-25 for its ability to output audio at +4dBu from the balanced 1/4” outputs, making it the best portable audio interface to pack between the field and the studio. Have to listen in real time? Monitor direct! The UA-25 includes direct monitor controls that allow you to route audio directly from the inputs to the outputs & the headphone jack, so you can listen with no latency. You can turn direct monitoring on or off, adjust the relative volume of the input signal compared to the audio playing out from your computer, and even set the signal to monitor in MONO. Why MONO? Two reasons: 1) if you have plugged a microphone into one of the inputs you may still want to hear it in both headphones, 2) listening in MONO is the quickest way to identify phase problems between two inputs. One of the best reasons for considering the UA-25 the best audio interface to use in the field is the inclusion of an analogue compressor built into the interface. This gives you a little more discrepancy when setting mic levels, with less chance of clipping. If your first take is your only chance, you DON”T want to get caught without this feature and the UA-25 is the only USB-powered stereo audio interface in the market that offers it. Add in 24-bit/96kHz audio performance, MIDI I/O, S/P DIF Optical I/O, and Neutrik XLR/TRS inputs with high-grade microphone preamps, and the UA-25 is everything you need to get superb audio to and from your computer. Another very important consideration in choosing your audio interface is driver stability. Edirol is #1 when it comes to stable drivers for our audio and MIDI interfaces. With ASIO2.0, WDM, MME, and CoreAudio, the UA-25 offers a wide variety of support for both Mac & PC. Connectors - Front Panel - Input Jack L, R - XLR type (balanced, phantom power +48 V) - 1/4” TRS phone type (balanced) * * Input Jack 2: high impedance is supported Headphones Jack (Stereo 1/4 inch) - Rear Panel - Digital Input Connector (Optical type) Digital Output Connector (Optical type) Output Jack L, R - 1/4 inch TRS phone type (balanced) - RCA phono type MIDI Connectors (IN/OUT) USB Connector (B type) Power Supply: USB Bus Power Current Draw: 480 mA Dimensions: 164 (W) x 133 (D) x 46 (H) mm 6-1/2 (W) x 5-1/4 (D) x 1-13/16 (H) in Weight: 554 g / 1 lb 4 oz Accessories Owner's Manual USB cable CD-ROM System Requirements Macintosh OS: Mac OS 9, 10.2 or later Computer: Apple Macintosh series with on-board USB port CPU/Clock: PowerPC G3 400 MHz or higher Memory(RAM): 256MB or More Hard Disk: 200 MB of free space Windows OS: Microsoft® Windows® XP Home Edition/ XP Professional /2000 Professional /Me/98 Second Edition Computer: Windows® XP Compatible PC CPU/Clock: Pentium®, Celeron®, or Pentium® compatible processor 600 MHz or higher Memory(RAM): 256MB or more Hard Disk: 200 MB of free space USB audio interface with mic preamps, Hi-Z input, input limiter, midi, SPDIF I/O and direct monitoring. Click Here for More Information about Edirol UA-25 USB Audio interface. Edirol UA-25 USB Audio interface Computer Hardware - Edirol - Delivery for Edirol UA-25 USB Audio interface: . The UA-25 is a powerful USB Audio/MIDI interface designed to offer premium sound quality, rugged durability, and complete portability to the computer-based audio engineer. The UA-25 is compact enough to travel anywhere you can take your computer. It is designed using high-grade aluminium for the chassis, which offers two benefits: 1) The UA-25 can withstand hard impacts that are normally associated with travelling or working in the field, and 2) The aluminium is an excellent shield against high-frequency interference from other electrical components. The UA-25 is USB powered, so you never have to plug it into a wall socket, but you can still power condenser microphones with 48V phantom power. The seasoned audio professional will love the UA-25 for its ability to output audio at +4dBu from the balanced 1/4” outputs, making it the best portable audio interface to pack between the field and the studio. Have to listen in real time? Monitor direct! The UA-25 includes direct monitor controls that allow you to route audio directly from the inputs to the outputs & the headphone jack, so you can listen with no latency. You can turn direct monitoring on or off, adjust the relative volume of the input signal compared to the audio playing out from your computer, and even set the signal to monitor in MONO. Why MONO? Two reasons: 1) if you have plugged a microphone into one of the inputs you may still want to hear it in both headphones, 2) listening in MONO is the quickest way to identify phase problems between two inputs. One of the best reasons for considering the UA-25 the best audio interface to use in the field is the inclusion of an analogue compressor built into the interface. This gives you a little more discrepancy when setting mic levels, with less chance of clipping. If your first take is your only chance, you DON”T want to get caught without this feature and the UA-25 is the only USB-powered stereo audio interface in the market that offers it. Add in 24-bit/96kHz audio performance, MIDI I/O, S/P DIF Optical I/O, and Neutrik XLR/TRS inputs with high-grade microphone preamps, and the UA-25 is everything you need to get superb audio to and from your computer. Another very important consideration in choosing your audio interface is driver stability. Edirol is #1 when it comes to stable drivers for our audio and MIDI interfaces. With ASIO2.0, WDM, MME, and CoreAudio, the UA-25 offers a wide variety of support for both Mac & PC. Connectors - Front Panel - Input Jack L, R - XLR type (balanced, phantom power +48 V) - 1/4” TRS phone type (balanced) * * Input Jack 2: high impedance is supported Headphones Jack (Stereo 1/4 inch) - Rear Panel - Digital Input Connector (Optical type) Digital Output Connector (Optical type) Output Jack L, R - 1/4 inch TRS phone type (balanced) - RCA phono type MIDI Connectors (IN/OUT) USB Connector (B type) Power Supply: USB Bus Power Current Draw: 480 mA Dimensions: 164 (W) x 133 (D) x 46 (H) mm 6-1/2 (W) x 5-1/4 (D) x 1-13/16 (H) in Weight: 554 g / 1 lb 4 oz Accessories Owner's Manual USB cable CD-ROM System Requirements Macintosh OS: Mac OS 9, 10.2 or later Computer: Apple Macintosh series with on-board USB port CPU/Clock: PowerPC G3 400 MHz or higher Memory(RAM): 256MB or More Hard Disk: 200 MB of free space Windows OS: Microsoft® Windows® XP Home Edition/ XP Professional /2000 Professional /Me/98 Second Edition Computer: Windows® XP Compatible PC CPU/Clock: Pentium®, Celeron®, or Pentium® compatible processor 600 MHz or higher Memory(RAM): 256MB or more Hard Disk: 200 MB of free space
Music | Computer Hardware | Consumer Electronics | Computer Software
Privacy Policy: www.musical-instruments-uk.org.uk does not collect or store any user information. |
